The Pocket bottle warmer works with a lithium rechargeable battery and a warming plate. Put the bottle warmer upside down and simply screw your bottle, filled with water or breastmilk, directly onto it, turn the device back on its base and on a flat surface, and press the on button to start the warming cycle. You can warm up baby’s milk anywhere without the need for a socket.

It’s compatible with Bebeconfort wide neck plastic bottles such as Physio Air and Emotion, as well as Philips Avent wide neck plastic bottles.

Before using a Bebeconfort bottle for the first time, ensure it is clean and sterilised. Turn the Pocket bottle warmer upside down and check that the silicone joint is in place. Screw the baby bottle on tightly to prevent any leakage. Please note that Bebeconfort bottles are made from PP (Polypropylene), and their measurements can vary slightly due to different factors. This means some bottles might be more difficult to screw onto the warmer than others. If you encounter any issues, try screwing the bottle on slowly until it is secure.

The Pocket bottle warmer includes 3 adapters: • 50 mm adapter to fit wide neck plastic bottles from NUK • 53 mm adapter to fit wide neck plastic bottles from MAM/Lansinoh Wave. • 60 mm adapter to fit wide neck plastic bottles from Tommee Tippee.

It depends on the amount of liquid you’re heating up, the starting temperature of your liquid, and which setting you want. It will take approximately 5 minutes to heat up a 150 ml bottle from 20°C to 37° C.

It cannot be used with glass bottles as they will leak. It also cannot be used with Bebeconfort Physio Air Confort plastic bottles as the closing handle (Easy Clip) is not compatible with the warmer.

It depends on how frequently you use your warmer, the starting temperature, and how much liquid you warm each time. A fully charged battery can heat up to 8 bottles (of 150 ml).

Once the milk has reached the desired temperature on the screen, there will be a short beep. The warmer will then keep the milk at the chosen temperature. Using the “keep warm” function for long time will decrease the number of bottles that can be heated up before the battery runs out.

Unplug the USB cable and ensure the device is switched off and cool. Remove the silicone ring and adapter. The warming plate can be wiped clean with mild liquid soap and a damp cloth.

Before using a Bebeconfort bottle for the first time make sure it is clean and has been sterilised. Tip the Pocket bottle warmer upside down and check that the silicone joint is in place. Screw the baby bottle tightly to ensure there is no leakage. Plastic baby bottles like the Bebeconfort ones are made from PP (Polypropylene) and their measurements might change slightly from one bottle to the other due to different factors. Some bottles could be more difficult to screw on the bottle warmer than others. Should the issue arises, try to slowly screw the bottle until it is tight.